|
Dynalog supplies
the
program
as standard.
The program
allows a C-Scan Detector Unit to download all survey data into
the PC and to produce a report - with plots - automatically.
The C-Scan
Detector Unit is connected to the PC via an RS232 serial link.
Data is downloaded by using the PRINT facility.
By using the
'front panel' that appears on the
screen a range of functions can be selected:
 |
Initiate
the fully automatic download and format procedure. This
produces the report automatically, complete with graphical
plots of DEPTH, CURRENT and ATTENUATION. If GPS data is
present, a positional plot of each survey point is
produced, expressed as offsets in metres from the survey
start point. |
 |
Recall
and display of 'old'
for DOS files, displayed in the new format.
|
 |
Manipulation of the source data for corrections - with a
re-format function. |
 |
Add
pipeline data such as reference points, features, and CP
points - e.g: points adjacent to trees, roads, pylons,
etc., for which a wide range of symbols is included in the
Detector Unit display. |
Examples of
typical
print-out
reports are reproduced in
Figures 4 - 7
|